How Much Does Generator Installation Cost in Greater Puget Sound?

Real price ranges, what moves the number, and where we land. No runaround.

★★★★★ 5.0
743 Google Reviews | Licensed & Insured | Family Owned & Operated

The Short Answer

$1,200 – $20,270

A transfer switch so you can safely plug in a portable generator runs about $1,200. A Generac standby that turns on by itself runs about $12,200 to $14,100 for essentials and $15,400 to $20,270 for the whole home, installed.

Special Financing AvailablePayment plans for any budget, on approved credit.

Generator Installation Price Ranges

Installed prices: generator or transfer switch, wiring, gas hookup and startup. The electrical permit and inspection are extra. Your exact price comes after we see your home.

Good

Portable Generator Hookup

About $1,200

A manual transfer switch and outside inlet (30 or 50 amp) so you can safely run your furnace, fridge and lights off a portable generator. No back-feeding, no extension cords through the window. Longer runs from the panel cost more.

Better

Standby Generator: Essentials

$12,200 – $14,100

A 10 or 14kW Generac home standby generator that turns on by itself when the power goes out and covers your key circuits: heat, fridge, well pump, lights and outlets.

Best

Whole-Home Standby Generator

$15,400 – $20,270

An 18 to 26kW Generac standby with an automatic transfer switch that runs the whole house, including your heat pump or AC, until the power comes back.

What Pushes Your Price Up or Down

1

Generator Size

The more you want running during an outage, the bigger the generator. Whole-home units cost more than essentials-only.

2

Manual or Automatic Switch

A manual transfer switch for a portable generator costs far less than an automatic switch for a standby unit.

3

Gas Line

Standby generators run on natural gas or propane. A long gas run, or a bigger meter from the gas utility, adds to the job. A high-capacity gas stub for the generator is about $850.

4

Distance From Your Panel

Our price includes up to 25 feet of wire run. Past that, it is about $20 per foot (measured along the actual path, not as the crow flies).

5

Pad & Placement

Standby units need a level pad and code clearances from windows, doors and the property line.

6

Permit & Inspection

Generator installs need an electrical permit and inspection, and often a gas permit too. We pull them and schedule the inspections.

Why Some Quotes Are Cheaper

Back-feeding a dryer outlet with a cord (dangerous for you and utility crews), no permit, an undersized gas line, or a generator too small for what you need. Always ask what is included.

Why Some Quotes Are Pricier

Big ad budgets, commission-heavy sales teams and add-ons you didn’t ask for. Higher price doesn’t always mean a better install.

Where We Land

Usually right in the middle. We’re a Generac dealer, and the install is done by our own licensed electricians, led by a Generac-certified master electrician, not a sub. We size the generator to what you actually want running, pull the permits, and start it up and test it with you before we leave. No oversized unit you don’t need. Same crew that has earned 5 stars on Google from 740+ local homeowners.

Common Questions

A portable generator with a transfer switch is the budget way to keep heat, the fridge and a few lights on. A standby generator turns on by itself in seconds, even when you are not home, and can run the whole house.

It depends on what you want running when the power goes out. A 10 or 14kW unit covers the essentials: furnace, fridge, lights, outlets and a well pump. To run the whole house, including a heat pump or AC, most homes need 18 to 26kW. We look at your panel and what you use, then size it so you are not paying for more generator than you need.

The install itself is usually one full day on site. Before that, we pull the permits, and if your gas meter needs an upgrade, the gas utility has to schedule that. After the install, the inspector signs off and we start it up and test it with you.

Yes, we can give you a ballpark on the phone. For a faster and more accurate number, try our online pricing tool. Answer a few questions about your home and you’ll see a price range in about 2 minutes.

David Mayster, Owner of Mayster Heating • Air • Electric

About the Author

David Mayster, Owner

David has been in the HVAC trade since 2013. He started as an apprentice, learned the work from the ground up, and opened Mayster in 2019. Today he runs a team of techs, installers and electricians serving King, Pierce and Thurston Counties.

Updated November 2026 · Read David's full bio →

See Your Number in About 2 Minutes

Answer a few questions about your home and get a price range. No pushy follow-up.

Schedule Service or Request an Estimate

Submit your details for a precise proposal tailored to your project’s specifications and timeline.

By submitting this form, you agree to our Privacy Policy and Terms & Conditions.