Real price ranges, what moves the number, and where we land. No runaround.
The Short Answer
$4,000 – $7,000
A straight panel swap usually runs about $4,000 to $4,300. Upgrading your whole service to 200 amps runs about $5,600 to $6,900. Your amperage, meter base and utility hookup decide where you land.
Installed prices for the panel work, based on our real jobs. The electrical permit and inspection add about $450 to $560 depending on your city or county. Your exact price comes after we see your home.
$4,000 – $4,300
Swap an old or unsafe panel for a new, surge-protected one (125 or 200 amp). Common for older brands that insurers flag.
$5,600 – $6,900
A new 200-amp panel plus a bigger service from the utility, with the disconnect and reconnect handled for you. Room for a heat pump, EV charger or remodel. Most paid about $6,300.
About $7,000
A new 200-amp panel plus a new overhead service mast and connection, for homes where the wires come in from a pole and the old mast has to go.
Going from 100 to 200 amps means a bigger panel, meter base and service wire. A same-size swap costs less.
Bigger upgrades need TPU or PSE to disconnect and reconnect power. We handle the scheduling.
Older meter bases or overhead masts often have to be replaced along with the panel.
Grounding, bonding and AFCI or GFCI breakers required by today’s code add to the job.
Moving the panel, or working around finished walls, adds labor and patching.
Every panel upgrade needs an electrical permit and an inspection by L&I or your city. We pull it and schedule it. It adds about $450 to $560.
No permit, no inspection, reusing an old meter base, or skipping code updates you will have to fix when you sell. Always ask what is included.
Big ad budgets, commission-heavy sales teams and add-ons you didn’t ask for. Higher price doesn’t always mean a better install.
Usually right in the middle. Our own licensed electricians do the work, not a sub. We pull the permit, deal with the utility on the disconnect and reconnect, and bring the panel up to today’s code so it passes inspection the first time. You get a clean, labeled panel and a crew that shows up on time, explains your options and cleans up before leaving. That’s how we’ve earned 5 stars on Google from 740+ local homeowners.
Not always. It depends on how big your current service is and what is already on it. Our electrician runs a load calculation to see if your panel has room. Many homes with 100-amp service need to go to 200 amps for a heat pump or EV charger, but sometimes a load management device lets you skip the upgrade and save money. We will tell you which one makes sense before any work starts.
About 7 hours on install day. We set the shutoff time with you ahead of time, and we turn your power back on and test every circuit before we leave.
Yes, it often is. Panels from brands like Federal Pacific (Stab-Lok) and Zinsco are known for breakers that do not trip when they should, which can cause overheating and fires, and many insurance companies flag them. Any panel can be a risk if it is 25 to 30+ years old, still uses fuses, feels warm, buzzes, smells like burning, shows rust or scorch marks, or trips breakers often. If you are seeing any of that, have a licensed electrician check it.
Yes, we can give you a ballpark on the phone. For a faster and more accurate number, try our online pricing tool. Answer a few questions about your home and you’ll see a price range in about 2 minutes.
About the Author
David has been in the HVAC trade since 2013. He started as an apprentice, learned the work from the ground up, and opened Mayster in 2019. Today he runs a team of techs, installers and electricians serving King, Pierce and Thurston Counties.
Answer a few questions about your home and get a price range. No pushy follow-up.
Submit your details for a precise proposal tailored to your project’s specifications and timeline.
By submitting this form, you agree to our Privacy Policy and Terms & Conditions.